Now the potentiometer should be mounted with its bracket, but be shure to put the little brass tube on to the screw at the end of the steering rod first. The Distance from the top of the potentiometer axle tu the top auf the screw at the end of the steering rod should be within 0.5...2 mm. You need a 14 mm key for the nut of the potentiometer. Last not least you have to connect the screw with the potentiometer axle by tightening the two screws.
---
Poti
pot should now be installed with the help of his brackets, but first you should have pushed the small brass tube on the screw at the end of the bar. The distance of the screw tip to the top of the potentiometer axle should be about 0.5 ... 2 mm. You need a 14mm wrench for the pot-mother. Not to forget is that you screwed the screw with the potentiometer axle with the help of the brass tube.
0 comments:
Post a Comment